Surface charging behaviors of electrocatalytic interfaces with partially charged chemisorbates

The surface charge is a key concept in electrochemistry. Mathematically, the surface charge is obtained from a spatial integration of the volume charge along a particular direction. Ambiguities thus arise in choosing the starting and ending points of the integration. As for electrocatalytic interfaces, the presence of chemisorbates further complicates the situation. In this minireview, I adopt a definition of the surface charge within a continuum picture of the electric double layer. I will introduce surface charging behaviors of firstly ordinary electrochemical interfaces and then electrocatalytic interfaces featuring partially charged chemisorbates. Particularly, the origin of nonmonotonic surface charging behaviors of electrocatalytic interfaces is explained using a primitive model. Finally, a brief account of previous studies on the nonmonotonic surface charging behavior is presented, as a subline of the spectacular history of electric double layer.     

Application of advanced nuclear analytical techniques for the electrocatalyst's characterization: Paving the path for mechanistic investigations

As the application of electrocatalyst continues to expand, envisaging the hidden mechanisms occurring at various length scale affecting the catalytic efficiency became important. To enhance the stability of electrocatalyst and reduce the cost, it is of paramount importance to reveal the active site's dynamics (using in situ techniques for getting the real-time information) which directly affect the reactions such as oxygen evolution reaction, hydrogen evolution reaction, and so on. Since such reactions are crucial for many engineering and scientific applications, in situ characterization techniques are required, which could capture such reactions happening at a different length and time scale. This article analyzes the recent progress made in the field of electrocatalyst's characterization using in situ neutron techniques. The article also paves the future path and has delineated the future challenges involved in multiscale correlative techniques (e.g., neutron techniques in the combination of synchrotron or microscopic techniques) used for getting the multiscale (atomic to micrometer range) mechanistic information about the electrocatalyst's working and degradation.     

DSA、CTA联合MR影像评估AIS患者脑支循环及预后性关系

探讨数字减影血管成像(DSA)、计算机断层扫描血管成像(CTA)联合磁共振(MR)影像评估急性缺血性卒中(AIS)患者脑支循环及预后性关系。选取60例大脑中动脉M1段急性闭塞所致AIS患者为研究对象,根据DSA、CTA与MR影像对其脑侧支循环评估,比较患者基线资料、结局指标等,并分析预后性。结果发现:基于DSA、CTA与MR影像对AIS患者脑侧支循环评估结果一致性良好;3种影像模式下脑侧支循环良好组与不良组结局资料差异显著(P<0.05);多因素分析显示,FVH-ASPECTS评分、rLMC评分、ASITN/SIR分级量表均为AIS患者神经功能预后的独立影响因素。总之,DSA、CTA、MR影像对AIS患者脑侧支循环评估具有一致性,且FVH-ASPECTS评分、rLMC评分、ASITN/SIR分级量表均为AIS患者神经功能预后的独立影响因素。     

Surface and volume non-invasive methods for the structural monitoring of the bass-relief ‘Madonna con Bambino’ (Gorizia,Northern Italy)

Abstract

Structural analysis of marble statues, carried out by non-invasive and in situ methods, is crucial to define the state of conservation of the artworks and to identify the deterioration phenomena that can affect them. In this work, we combined in situ non-destructive techniques, ultrasonic tomography (US), ultraviolet-induced visible fluorescence (UV-IF) and X-ray fluorescence (XRF) to study the bass-relief ‘Madonna con Bambino’ (Gorizia, Italy). The US revealed the presence of some metallic pivots, associated with areas of high sound velocity; moreover, a more degraded area has been identified in the lower part of the bass-relief. The acquired UV-IF image confirmed the presence of surface degradation, allowing a preliminary evaluation of the extension of a fracture, from surface to bulk. In addition, the different materials (both original and/or integrations) that compose the studied surface have been identified. The XRF has contributed to define the nature of the inorganic materials applied during undocumented previous restoration works on the surface as filler for lacunae.     

Synthesis,Crystal Structure,and Selected Properties of [Au(S2CNH2)2]SCN: A Precursor for Gold Macro-Needles Consisting of Gold Nanoparticles Glued by Graphitic Carbon Nitride

A new preparation route is developed for the synthesis of needle-like crystals of [Au(S₂CNH₂)₂]SCN, which avoids disproportionation of the Au^I salt used as a starting material. In the crystal structure, the two crystallographically independent Au^III centers are in a square-planar environment of two S₂CNH₂ ligands. The Hirshfeld surface analysis reveals the presence of noncovalent intermolecular S⋅⋅⋅S interactions, which are essential for the spatial arrangement of the molecules. Density functional theory (DFT) calculations including dispersion and damping corrections result in a unit cell volume very close to the value determined experimentally. Thermal decomposition in an inert atmosphere generates black needles with lengths of up to 500 μm. X-ray powder diffraction and pair distribution function analyses demonstrate that the needles are composed of nanosized crystals with a volume-weighted average domain size of 20(1) nm. According to results of X-ray photoemission experiments, the black needles are covered by a nitrogen-rich carbon nitride with composition near (CN)₂N. ¹³C solid-state NMR investigations indicate that two different carbon species are present, with signals corresponding well to heptazine units as in melon and triazine units as in poly(triazin imide) type compounds. Scanning transmission electron microscopy tomography evidences that the needles are composed of slightly elongated nanoparticles.     

Two-dimensional optical coherence tomography for real-time structural dynamical characterization

We present a two-dimensional optical coherence vibration tomography (2DOCVT) system with an ultra-precision displacement resolution of ~0.1 nm that is capable of in site real-time absolute displacement measurement of structural line vibrations. Experimental results of sinusoidal, sweep and impulse vibrations were reported. The key figures of merit such as the 2DOCVT system could obtain fast line vibration measurement without scanning and it also could be used to capture structural modal parameters in one single impulse excitation measurement without any vibration excitation input information, making it attractive for the application in low-frequency vibration measurement and response-only modal analysis.     

Where the rubber meets the hand: Unlocking the sensing potential of dielectric elastomers

Practice makes perfect to some extent. Research has shown that musicians who practice the piano for long periods of time can suffer a range of hand problems from loss of control to diminished speed. Now imagine a rubber keyboard that is springy, soft, and elastic. This is the new type of input device that dielectric elastomers (DE) can create. However their usage in large sensing systems is limited by a scalability challenge. Each DE sensor is married to a pair of connection cables and electronics, adding to the complexity of the background overheads. A new efficient multi‐frequency method is presented that is capable of detecting internal pressure changes from a difference in the DE's capacitance without the need for any additional wires or connections. This effectively segments the DE into smaller sections, achieving information from a single sensor equivalent to multiple sensors. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 465–472     

Enhanced magnetoconductivity and electrical property of MWCNT-CdS nanocomposite embedded in polyaniline

PANI/MWCNT-CdS nanocomposites with different content of CdS wt.% has been synthesized by the chemical oxidative in-situ polymerization reaction of aniline in the presence of multi-walled carbon nanotubes (MWCNT). TEM, XRD, FTIR, and TGA studies were done for the structural and thermal characterization of the samples respectively. The particle size of CdS nanoparticles distributes in between 2.7 and 4.8 nm. XRD spectrum reveals that the co-existence of MWCNT, CdS in PANI matrix, where CdS forms a hexagonal structure. TGA result shows that nanocomposite becomes more thermally stable with the increase in CdS content. The dc electrical transport property of PANI/MWCNT-CdS nanocomposites has been investigated within a temperature range 77 ≤ T ≤ 300 K. The dc conductivity follows a 3D variable range hopping (VRH) model. A large magnetoconductivity change (19%) is observed for 2 wt% CdS content in PANI/MWCNT-CdS, which is explained by the wave function shrinkage model.     

From Minutes to Years: Predicting Organotrifluoroborate Solvolysis Rates

Organotrifluoroborates solvolyze in water at rates that vary over five orders of magnitude. The negative logarithm of the solvolytic rate constant, pk_(B?F), correlates exceptionally well with the pK_a of the analogous carboxylic acid (R²=0.984). This unforeseen correlation may be of predictive value for several applications including Suzuki–Miyaura cross‐coupling reactions and the design of ¹⁸F‐organotrifluoroborate radioprosthetic groups.     

Optimization of STEM-HAADF Electron Tomography Reconstructions by Parameter Selection in Compressed Sensing Total Variation Minimization-Based Algorithms

A novel procedure to optimize the 3D morphological characterization of nanomaterials by means of high angle annular dark field scanning-transmission electron tomography is reported and is successfully applied to the analysis of a metal- and halogen-free ordered mesoporous carbon material. The new method is based on a selection of the two parameters (μ and β) which are key in the reconstruction of tomographic series by means of total variation minimization (TVM). The parameter-selected TVM reconstructions obtained using this approach clearly reveal the porous structure of the carbon-based material as consisting of a network of parallel, straight channels of ≈6 nm diameter ordered in a honeycomb-type arrangement. Such an unusual structure cannot be retrieved from a TVM 3D reconstruction using default reconstruction values. Moreover, segmentation and further quantification of the optimized 3D tomographic reconstruction provide values for different textural parameters, such as pore size distribution and specific pore volume that match very closely with those determined by macroscopic physisorption techniques. The approach developed can be extended to other reconstruction models in which the final result is influenced by parameter choice.